On SADP you cannot set port to 80 its too low if thats what you are suggesting, min port value on SADP is 2000 and up. I tried numerous IP and ports right now its identical settings as my other Hikvision and can not get it to open on any browser, or IVMS4200. IP 192.168.0.119. Port 8080. My ISP sent me an updated router. I have installed the router, and I can view my Hikvision cameras through the IVMS-4200 PC software. But I cannot view them via the IVMS-4500 app on my iphone or ipad. I think there are settings that I must need to change, but I don't know which settings. I didn't install the system, so I am not sure where to start. Resetting to factory defaults on both the problem cameras and NVR did not work, different ports, new cables, firmware upgrades, etc. also did not work. The problem would be intermittent. It may be viewable for a few hours, a day or so, etc. then become unresponsive again. When the cameras would be plugged into another network for testing or 4. Click OK to complete activation and enter Live View page. 5. Modif y IP address of the camera. 1) Enter IP address modification page. Configuration → Network → TCP/IP 2) Change IP address. 3) Save the settings. Activate and Access Network Camera User Guide 4 Hikvision’s Technical Support is available to you in many helpful formats. Wherever you are, whenever you need it, we have resources ready. Create a 'static route' on your LAN gateway/router to inform LAN devices how to reach the NVR PoE network segment. Something like 'For network 192.168.254.0, subnet mask 255.255.255.0, use as the gateway'. Then the PoE-connected cameras can be accessed from the LAN via their native (192.168.254.x) IP address. .

can t access hikvision live view